USM Haller Tools: What You Need for Assembly and Disassembly
Without the right tools, USM Haller furniture is hard to assemble or dismantle properly. The system is brilliantly designed, but connectors, tubes and balls can only be fitted correctly with special tools – ordinary hardware-store tools won’t get you far.
I have worked with our tools myself and can recommend them. Here is an overview of what is available and what you really need (prices as of October 2026).
The connector puller – the right one for each generation
Anyone who has tried to knock out stuck connectors with a rubber mallet knows the problem: it works badly and you risk damaging the tubes. A connector puller does the job cleanly – insert, grip the connector, pull it out. No hammering, no risk.
Important: 1st and 2nd generation connectors are built differently, so there is a separate tool for each generation. The two are not interchangeable:
- Connector puller 2nd generation (€12.99) – for newer and all current USM Haller furniture.
- Connector puller 1st generation (€27.99) – for older 1st generation furniture (built until around 1990), for dismantling and reassembling. We show how it works step by step in connector puller 1st generation.
You can tell which generation your furniture is by its connectors – the differences are explained in 1st vs. 2nd generation. If you own old and new pieces, you need both. Note: our spare parts (connectors, balls, tubes, panels etc.) only fit the 2nd generation – you cannot extend 1st generation furniture with them.
Complete tool set (€45.99) – the starter
The complete tool set is light (around 0.8 kg) and cleverly designed: two T-handles (42 and 38 cm) screw together into one long rod. That way one tool reaches every depth – from a compact sideboard to a floor-to-ceiling cabinet row. For assembling a sideboard or shelf it is all you need. There is a detailed hands-on test in tool set review.
Professional tool set in a case (€89.99)
If you rebuild more often, the professional set in a case is the better choice. Besides stainless-steel T-handles with a hardened 5 mm hex, it contains a ratchet, extensions, a hammer, a rubber mallet and a magnet for retrieving loose connectors. The tool ends are magnetic – which saves a lot of fiddling when dismantling.
Professional tool kit complete in a case (€99.99) – the flagship
The complete kit in a hard case is our highest-quality option: better-finished stainless steel, T-handles in fixed lengths (75 cm for the longest tubes, 35 cm for the usual depth), nothing needs to be screwed together. For office outfitters, furniture fitters and anyone who regularly assembles and dismantles USM Haller, it is the clear recommendation.
A small helper: a suction lifter
The panels are smooth and can slip when you insert them, especially the large ones. A simple suction lifter from a hardware store gives you a safe grip.
Who needs USM Haller tools?
Pretty much everyone who owns USM Haller furniture and wants to rebuild it or set up a new piece – private customers as well as professionals. For bulk buyers and office outfitters a volume discount applies automatically from an order value of €1,000, and the tools ship quickly in larger quantities too. You will find all tools in the tools category.
My recommendation
For occasional users: the complete tool set (€45.99) plus the connector puller for your generation (€12.99 or €27.99). That fully equips you for around €60 to €75.
For frequent users and professionals: the professional set in a case (€89.99) or straight away the complete kit in a hard case (€99.99) – everything included, everything organised. How the assembly works step by step is explained in the assembly guide.